EPD_2in13bc.h (4720B)
1 /***************************************************************************** 2 * | File : EPD_2in13bc.h 3 * | Author : Waveshare team 4 * | Function : 2.13inch e-paper b&c 5 * | Info : 6 *---------------- 7 * | This version: V3.0 8 * | Date : 2019-06-13 9 * | Info : 10 * ----------------------------------------------------------------------------- 11 * V3.0(2019-06-13): 12 * 1.Change: 13 * EPD_Reset() => EPD_2IN13BC_Reset() 14 * EPD_SendCommand() => EPD_2IN13BC_SendCommand() 15 * EPD_SendData() => EPD_2IN13BC_SendData() 16 * EPD_WaitUntilIdle() => EPD_2IN13BC_ReadBusy() 17 * EPD_Init() => EPD_2IN13BC_Init() 18 * EPD_Clear() => EPD_2IN13BC_Clear() 19 * EPD_Display() => EPD_2IN13BC_Display() 20 * EPD_Sleep() => EPD_2IN13BC_Sleep() 21 * 2.remove commands define: 22 * #define PANEL_SETTING 0x00 23 * #define POWER_SETTING 0x01 24 * #define POWER_OFF 0x02 25 * #define POWER_OFF_SEQUENCE_SETTING 0x03 26 * #define POWER_ON 0x04 27 * #define POWER_ON_MEASURE 0x05 28 * #define BOOSTER_SOFT_START 0x06 29 * #define DEEP_SLEEP 0x07 30 * #define DATA_START_TRANSMISSION_1 0x10 31 * #define DATA_STOP 0x11 32 * #define DISPLAY_REFRESH 0x12 33 * #define DATA_START_TRANSMISSION_2 0x13 34 * #define VCOM_LUT 0x20 35 * #define W2W_LUT 0x21 36 * #define B2W_LUT 0x22 37 * #define W2B_LUT 0x23 38 * #define B2B_LUT 0x24 39 * #define PLL_CONTROL 0x30 40 * #define TEMPERATURE_SENSOR_CALIBRATION 0x40 41 * #define TEMPERATURE_SENSOR_SELECTION 0x41 42 * #define TEMPERATURE_SENSOR_WRITE 0x42 43 * #define TEMPERATURE_SENSOR_READ 0x43 44 * #define VCOM_AND_DATA_INTERVAL_SETTING 0x50 45 * #define LOW_POWER_DETECTION 0x51 46 * #define TCON_SETTING 0x60 47 * #define RESOLUTION_SETTING 0x61 48 * #define GET_STATUS 0x71 49 * #define AUTO_MEASURE_VCOM 0x80 50 * #define READ_VCOM_VALUE 0x81 51 * #define VCM_DC_SETTING 0x82 52 * #define PARTIAL_WINDOW 0x90 53 * #define PARTIAL_IN 0x91 54 * #define PARTIAL_OUT 0x92 55 * #define PROGRAM_MODE 0xA0 56 * #define ACTIVE_PROGRAM 0xA1 57 * #define READ_OTP_DATA 0xA2 58 * #define POWER_SAVING 0xE3 59 * V2.0(2018-11-13): 60 * 1.Remove:ImageBuff[EPD_HEIGHT * EPD_WIDTH / 8] 61 * 2.Change:EPD_Display(UBYTE *Image) 62 * Need to pass parameters: pointer to cached data 63 # 64 # Permission is hereby granted, free of charge, to any person obtaining a copy 65 # of this software and associated documnetation files (the "Software"), to deal 66 # in the Software without restriction, including without limitation the rights 67 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 68 # copies of the Software, and to permit persons to whom the Software is 69 # furished to do so, subject to the following conditions: 70 # 71 # The above copyright notice and this permission notice shall be included in 72 # all copies or substantial portions of the Software. 73 # 74 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 75 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 76 # FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 77 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 78 # LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 79 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 80 # THE SOFTWARE. 81 # 82 ******************************************************************************/ 83 #ifndef __EPD_2IN13BC_H_ 84 #define __EPD_2IN13BC_H_ 85 86 #include "DEV_Config.h" 87 88 // Display resolution 89 #define EPD_2IN13BC_WIDTH 104 90 #define EPD_2IN13BC_HEIGHT 212 91 92 void EPD_2IN13BC_Init(void); 93 void EPD_2IN13BC_Clear(void); 94 void EPD_2IN13BC_Display(const UBYTE *blackimage, const UBYTE *ryimage); 95 void EPD_2IN13BC_Sleep(void); 96 97 #endif