EPD_1in54b.h (4889B)
1 /***************************************************************************** 2 * | File : EPD_1in54b.h 3 * | Author : Waveshare team 4 * | Function : 1.54inch e-paper b 5 * | Info : 6 *---------------- 7 * | This version: V3.1 8 * | Date : 2019-06-12 9 * | Info : 10 * ----------------------------------------------------------------------------- 11 * V3.1(2019-06-12): 12 * 1.Change: 13 * lut_vcom0[] => EPD_1IN54_lut_vcom0[] 14 * lut_w[] => EPD_1IN54_lut_w[] 15 * lut_b[] => EPD_1IN54B_lut_b[] 16 * lut_g1[] => EPD_1IN54B_lut_g1[] 17 * lut_g2[] => EPD_1IN54B_lut_g2[] 18 * lut_vcom1[] => EPD_1IN54B_lut_vcom1[] 19 * lut_red0[] => EPD_1IN54B_lut_red0[] 20 * lut_red1[] => EPD_1IN54B_lut_red1[] 21 * EPD_Reset() => EPD_1IN54B_Reset() 22 * EPD_SendCommand() => EPD_1IN54B_SendCommand() 23 * EPD_SendData() => EPD_1IN54B_SendData() 24 * EPD_WaitUntilIdle() => EPD_1IN54B_ReadBusy() 25 * EPD_SetLutBw() => EPD_1IN54B_SetLutBw() 26 * EPD_SetLutBw => EPD_1IN54B_SetLutBw() 27 * EPD_Init() => EPD_1IN54B_Init() 28 * EPD_Clear() => EPD_1IN54B_Clear() 29 * EPD_Display() => EPD_1IN54B_Display() 30 * EPD_Sleep() => EPD_1IN54B_Sleep() 31 * ----------------------------------------------------------------------------- 32 * V3.0(2019-04-24): 33 * 1.remove commands define: 34 * #define PANEL_SETTING 0x00 35 * #define POWER_SETTING 0x01 36 * #define POWER_OFF 0x02 37 * #define POWER_OFF_SEQUENCE_SETTING 0x03 38 * #define POWER_ON 0x04 39 * #define POWER_ON_MEASURE 0x05 40 * #define BOOSTER_SOFT_START 0x06 41 * #define DEEP_SLEEP 0x07 42 * #define DATA_START_TRANSMISSION_1 0x10 43 * #define DATA_STOP 0x11 44 * #define DISPLAY_REFRESH 0x12 45 * #define DATA_START_TRANSMISSION_2 0x13 46 * #define PLL_CONTROL 0x30 47 * #define TEMPERATURE_SENSOR_COMMAND 0x40 48 * #define TEMPERATURE_SENSOR_CALIBRATION 0x41 49 * #define TEMPERATURE_SENSOR_WRITE 0x42 50 * #define TEMPERATURE_SENSOR_READ 0x43 51 * #define VCOM_AND_DATA_INTERVAL_SETTING 0x50 52 * #define LOW_POWER_DETECTION 0x51 53 * #define TCON_SETTING 0x60 54 * #define TCON_RESOLUTION 0x61 55 * #define SOURCE_AND_GATE_START_SETTING 0x62 56 * #define GET_STATUS 0x71 57 * #define AUTO_MEASURE_VCOM 0x80 58 * #define VCOM_VALUE 0x81 59 * #define VCM_DC_SETTING_REGISTER 0x82 60 * #define PROGRAM_MODE 0xA0 61 * #define ACTIVE_PROGRAM 0xA1 62 * #define READ_OTP_DATA 0xA2 63 * 64 * ----------------------------------------------------------------------------- 65 * V2.0(2018-10-30): 66 * 1.Remove:ImageBuff[EPD_1IN54B_HEIGHT * EPD_1IN54B_WIDTH / 8] 67 * 2.Change:EPD_Display(UBYTE *Image) 68 * Need to pass parameters: pointer to cached data 69 * 3.Change: 70 * EPD_RST -> EPD_RST_PIN 71 * EPD_DC -> EPD_DC_PIN 72 * EPD_CS -> EPD_CS_PIN 73 * EPD_BUSY -> EPD_BUSY_PIN 74 # 75 # Permission is hereby granted, free of charge, to any person obtaining a copy 76 # of this software and associated documnetation files (the "Software"), to deal 77 # in the Software without restriction, including without limitation the rights 78 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 79 # copies of the Software, and to permit persons to whom the Software is 80 # furished to do so, subject to the following conditions: 81 # 82 # The above copyright notice and this permission notice shall be included in 83 # all copies or substantial portions of the Software. 84 # 85 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 86 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 87 # FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 88 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 89 # LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 90 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 91 # THE SOFTWARE. 92 # 93 ******************************************************************************/ 94 #ifndef __EPD_1IN54B_H_ 95 #define __EPD_1IN54B_H_ 96 97 #include "DEV_Config.h" 98 99 // Display resolution 100 #define EPD_1IN54B_WIDTH 200 101 #define EPD_1IN54B_HEIGHT 200 102 103 void EPD_1IN54B_Init(void); 104 void EPD_1IN54B_Clear(void); 105 void EPD_1IN54B_Display(const UBYTE *blackimage, const UBYTE *redimage); 106 void EPD_1IN54B_Sleep(void); 107 108 #endif